Publications

Graduate Research

H. B. Eldredge, The Solids Mixing Model for Scale-up of the Fluidized Bed Calcination Process, Ph.D. dissertation, University of Idaho, May 1991.

H. B. Eldredge, Computer Modeling of Diffusion Flame Structure in Solid Rocket Propellants, MS Thesis, Brigham Young University, December 1982.

Refereed Journal Articles

H. B. Eldredge and D. C. Drown, “Solids Flow and Mixing Model of a Fluidized Bed Coating and Calcination Process,” Chemical Engineering Science, 54(1999), 1253-1264.

T. J. Tranter, R. S. Herbst, T. A. Todd, A. L. Olsen, H. B. Eldredge, “Evaluation of Ammonium Molybdophosphate-Polyacrlonitrile (AMP-PAN) as a Cesium Selective Sorbent for the Removal of 137Cs from Acidic Nuclear Waste Solutions,” Advances in Environmental Research, Vol. 6, Issue 2, March 2002.

T. J. Tranter, R. S. Herbst, T. A. Todd, A. L. Olsen, H. B. Eldredge, “Application of a Second Order Kinetic Model for the Preliminary Design of an Adsorption Bed System using Ammonium Molybdophosphate-Polyacrylonitrile for the Removal of 137 Cs from Acidic Nuclear Waste Solutions,” Advances in Environmental Research, 7 (2002) 913-923.

G. B. Cotten and H. B. Eldredge, “Nanolevel Magnetic Separation Model Considering Flow Limitations,” Submitted to Advances in Environmental Research, May 2001.

T. J. Tranter, R. S. Herbst, T. A. Todd, A. L. Olsen, H. B. Eldredge, “Application of a Second Order Kinetic Model for the Preliminary Design of an Adsorption Bed System using Ammonium Molybdophosphate-Polyacrlonitrile for the Removal of 137Cs from Acidic Nuclear Waste Solutions,” Advances in Environmental Research, Vol. 7, Issue 4, June 2003.

Conference Papers

W.S. Roesener, J.B. Mason, K. Ryan, S. Bryson, and H.B. Eldredge, “Pyrolysis Autoclave Technology Demonstration Program for Treatment of DOE Solidified Organic Wastes,” Waste Management 2006 Conference, February 2006, Tucson, AZ.

H. B. Eldredge, M. F. Simpson, S. M. Frank, T. P. O’Holleran and K. J. Bateman, “Analysis of the Effect of Moisture on the Properties of Zeolite and Sodalite Waste Forms,” AICHE Spring National Meeting, Houston, TX, March 1999.

H. B. Eldredge and D. C. Drown, “Determination of Significant Factors that Affect Particle Coating Rates in a Fluidized Bed,” Third World Congress on Particle Technology, Brighton, England, July, 1998.

H. B. Eldredge and D. C. Drown, “Model of a Fluidized Bed Coating and Calcination Process Based on Solids Flow and Mixing,” Proceedings, Volume 2, First European Conference on Chemical Engineering, Florence, Italy, May, 1997.

H. B. Eldredge and S D. Lewis, “Determination of Particle Size Frequency Distributions using Cubic Spline Interpolation of Sieve Data,” Proceedings, Volume 2, First European Conference on Chemical Engineering, Florence, Italy, May, 1997.

K. L. Miller, P. A. Techmeyer, M. E. Dakins and H. B. Eldredge, “A Structured Guide to Waste Characterization,” 1997 Conference on Hazardous Waste and Materials Proceedings, Idaho State University, April 1997.

H. B. Eldredge and B. E. Olaveson, “Separation of Alkali Salts from ICPP Sodium-Bearing Waste using Organic Resins,” 1996 Conference on Hazardous Wastes and Materials Proceedings, Idaho State University, April 1996.

H. B. Eldredge and S. Lewis, “Analysis of Fluidized Bed Grinding using Cubic Spline Interpolation,” AIChE Summer Meeting, International Particle Technology Forum, Denver, CO, August 1994

H. B. Eldredge, J. P. Law, and B. J. Newby, “The Effect of Waste Chemistry on the Fluidized Bed Calcination Process,” ANS Topical Meeting on Radioactive Waste Management, Richland, WA, September 1988.

H. B. Eldredge, M. W. Beckstead and S. C. White, “Solid Propellant Diffusion Flame Structure,” 19th JANNAF Combustion Meeting, October 1982.

H. B. Eldredge, M. W. Beckstead and S. C. White, “Diffusion Flame Structure,” 18th JANNAF Combustion Meeting, Vol. III, CPIA No. 347, October 1981.

Other Publications

H. B. Eldredge, “Reverse Engineer Your Nomographs,” Chemical Engineering, April 2003, pp 81-85.

M. F. Simpson, S. M. Frank, T. P. O’Holleran, K. J. Bateman and H. B. Eldredge “Analysis of the Effect of Moisture on the Properties of Zeolite and Sodalite Waste Forms,” Argonne National Laboratory, NT Technical Memorandum No. 130, July 1999.

B. Olaveson and H. B. Eldredge, “Separation of Alkali Salts from ICPP Sodium Bearing Waste using Organic Resins,” Final Report, Contract No. C85-110544-100, October 1995.

H. B. Eldredge, “ODESolve.BAS – Version 1.5,” Educational software for solving differential equations. November 1993. (Used for teaching ChE 541 – Chemical Engineering Analysis).

H. B. Eldredge, “Operating Manual for ODESolve.BAS – Version 1.5, Educational Software for Solving Differential Equations,” November 1993.

B. Olaveson and H. B. Eldredge, “Separation of Alkali Salts from ICPP Sodium Bearing Waste using Organic Resins – Literature Search,” Final Report, Contract No. C85-110544-087, October 1993.

N. A. Chipman and H. B. Eldredge, “Idaho Falls Center for Higher Education,” The Retort, Idaho Academy of Science, Vol. 29, No. 2, August 1993.

H. B. Eldredge and D. C. Drown, “WINCO Modeling Evaluation for NWCF Capacity Increase,” Final Report, Contract No. C85-110544-070, June 1993.

D. C. Drown and H. B. Eldredge, “Mixed Bed Media Evaluation for the Coal-Fired Steam Generating Facility,” Final Report, Contract No. C85-110544-066, August 1992.

D. C. Drown and H. B. Eldredge “Status Report-Mixed Bed Media Evaluation,” Contract No. C85-110544-066, March 1991.

D. C. Drown and H. B. Eldredge, “Method for Scale-up of the Fluidized Bed Calcining Process,” Final Report, Contract No. C85-110544-054, March 1991.

H. B. Eldredge, “Enclosed 15-cm Calciner Pilot Plant Design Plan,” Westinghouse Idaho Nuclear Co., Report No. WIN-165, January 1986.

N. A. Chipman and H. B. Eldredge, “Survey of Mixed Radioactive-Hazardous Streams at the Idaho Chemical Processing Plant,” Westinghouse Idaho Nuclear Co., Report No. WIN-145, April 1985.